Connecting A Computer - Toshiba 32AV500E - 32" PAL/NTSC Multi-System HD Ready LCD Television Owner's Manual

Connecting a computer

To connect a PC to the RGB/PC terminal on the
TV:
An analog RGB (15 pin) computer cable can be
connected.
TV back view
Mini D-sub 15 pin
Computer
Audio cable for PC-to-TV connection
Connect a PC cable from the computer to the
o RGB/PC terminal on the back of the TV.
The following signals can be displayed:
• VGA: VESA 640 5 480 @ 60/72/75 Hz
• S-VGA: VESA 800 5 600 @ 60/72/75 Hz
• XGA: VESA 1024 5 768 @ 60/70/75 Hz
• W-XGA: VESA 1280 5 768 @ 60/75 Hz
• W-XGA: VESA 1360 5 768 @ 60 Hz
• S-XGA: VESA 1280 5 1024 @ 60 Hz
(Compressed)
However, these signal formats are converted to
match the number of pixels of the LCD panel.
Therefore, the TV may not display small text
properly.
If you connect this unit to your PC, the
compressed image is displayed in S-XGA mode,
therefore the picture quality may deteriorate and
characters may not be read.
Notes:
• Some PC models cannot be connected to this TV.
• If connecting a certain PC model that signal is
particular, the PC signal may not be detected
correctly.
• There is no need to use an adapter for
computers with DOS/V compatible mini D-sub
15 pin terminal.
Connecting your TV
TV back view
RGB PC cable
Conversion adapter
(if necessary)
• A bar may appear in the upper, lower, right or
left side of the screen, or parts of the picture
may be obscured depending on some signals.
This is not the malfunction.
• If the edges of the picture are stretched,
readjust the picture position adjustments in the
PC Setting menu.
• Depending on the specifi cation of the PC you
are playing the DVD-Video on, and the DVD's
title, some scenes may be skipped, or you may
not be able to pause during multi-angle scenes.
Signal names for mini D-sub 15 pin connector
Pin assignment for RGB/PC terminal
Pin No. Signal name
1 R
2 G
3 B
4 NC (not
connected)
5 NC
6 Ground
7 Ground
8 Ground
Pin No. Signal name
9 NC
10 Ground
11 NC
12 NC
13 H-sync
14 V-sync
15 NC
29