Toshiba 32AV500E - 32" PAL/NTSC Multi-System HD Ready LCD Television Owner's Manual page 31

Adjusting the clock phase of the picture
If the clock phase, which synchronize the PC
signal and LCD display, is not optimized, the
picture will blur.
This function enables you to adjust clock phase
and display a clear picture.
1
From the PC Setting menu, press u or U to
select Clock phase.
2
Press I or i to obtain a clear picture.
Clock phase
Adjusting the sampling clock
If the sampling clock does not match with the dot
clock frequency of the PC, blurred picture detail
will occur, or screen width will change, or drift
patterns in vertical lines may be apparent.
This function enables you to adjust it and
optimize the picture.
1
From the PC Setting menu, press u or U to
select Sampling clock.
2
Press I or i to optimize the picture.
Sampling clock
Resetting the PC setting
The Reset function adjusts the PC Setting to the
factory settings.
1
From the PC Setting menu, press u or U to
select Reset on the 2nd page.
Reset
MENU Back
2
Press Q.
Note:
When a PC is connected using HDMI none of
these function will be available.
Connecting your TV
0
0
PC Setting 2/2
0
OK
EXIT Watch TV
31