Toshiba 32AV500E - 32" PAL/NTSC Multi-System HD Ready LCD Television Owner's Manual page 19

Activating the DNR (Digital Noise
Reduction)
If the receiving signal is weak and the picture is
blurry, the picture may be improved when using
this function.
1
From the Picture settings menu, press u or
U to select DNR on the 2nd page.
2
Press I or i to select Auto, Off, Low, Middle
or High.
DNR
Note:
This function is available for 480i and 576i
signals.
Selecting the color temperature
You can change the tone of the picture by
selecting from three preset color temperatures:
Cool, Natural or Warm.
1
From the Picture settings menu, press u or
U to select Color Temperature on the 2nd
page.
2
Press I or i to select mode you prefer.
Color Temperature
Cool : Lends a blue hue to the picture.
Natural : Neutral
Warm : Lends a red hue to the picture.
Adjusting the color management
You can adjust the picture color quality by
selecting from 6 base color adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
1
From the PICTURE menu, press u or U to
select 3D Color management.
2
Press I or i, then press I or i to select On.
3D Color management
3
Press Q, then press u or U to select Base
color adjustment.
4
Press Q, then press u or U to select an item
you want to adjust.
Base color adjustment
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
MENU Back
Using the TV's features
Auto
Cool
On
Hue Saturation Brightness
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
OK
EXIT Watch TV
5
Press i, then press I or i to select Hue,
Saturation or Brightness.
Hue
Red 0
6
Press u or U to adjust the settings as
required.
Notes:
• If you select color management Off mode, this
mode is not available.
• In the PC input mode (- page 30), this mode
is not available.
Resetting the base color adjustment
The Reset function adjusts the base color
adjustment to the factory settings.
1
From the Base color adjustment menu,
press u or U to select Reset.
2
Press Q.
Using the active backlight control
In order to improve screen visibility, the active
backlight control sets the screen brightness
automatically during dark scenes.
1
From the PICTURE menu, press u or U to
select Active Backlight Control.
2
Press I or i to select On or Off.
Using the cinema mode
A movie fi lm's picture runs at 24 frames a
second, whereas movie software such as DVD,
etc., that you enjoy watching on television at
home runs at 30 (NTSC) or 25 (PAL) frames a
second. To convert this signal to reproduce a
smooth motion and picture quality, select the On
mode.
Effective signal and setup conditions:
• When the Video input mode is selected.
• When the input signal format is 480i and 576i
signals.
1
From the PICTURE menu, press u or U to
select Cinema mode.
2
Press I or i to select On or Off.
Note:
When a DVD movie with subtitle is playing back,
this mode may not work correctly.
Saturation Brightness
0 0
19