Brother IntelliFax-3550 Service Manual page 61

(2) Before taking out the scanner frame ASSY, make sure that the cover glass is removed
and the main-sensor harness is disconnected.
(3) Slightly lift up the scanner frame ASSY and disconnect the scanner motor harness from
the motor, then take out the ASSY.
NOTE: Take care not to scratch the mirrors (see the illustration below), CCD unit, or
NOTE: NEVER remove or replace the CCD unit. Its mounting position has been ad-
Main-sensor harness
Document
sensor PCB
Sponge
bar lens.
justed in the factory.
Clamps
CCD unit
(Do not remove)
Cover glass
(Remove before taking out the scanner
frame ASSY.)
Scanner motor harness
Scanner motor
Mirrors
(Front)
IV – 11
Bar lens and LED array
Scanner frame ASSY
Sponges