Wsw27 - Brother IntelliFax-3550 Service Manual

Selector
No.
1 Definition of programmable key
2 Ringer OFF setting
Automatic playback of OGM at
3
the start time of OGM ON mode
Detection of distinctive ringing
4
pattern
5 Automatic erasure of voice alarm
6
Not used.
7
Toner save mode.
8
Selector 1: Definition of programmable key
This selector defines a programmable key as a TEL key or TEL/POLLING key.
Setting this selector to "1" allows the programmable key to function as either a TEL or POLL-
ING key if pressed when the handset is off or on the hook, respectively.
This setting is effective only for those models having a programmable key.
Selector 2: Ringer OFF setting
This selector determines whether or not the ringer can be set to OFF.
Selector 3: Automatic playback of OGM at the start time of OGM ON mode (For those models
equipped with a built-in TAD)
This selector determines whether or not the equipment automatically plays back an OGM the
moment it switches to the OGM ON mode in the MC mode.
Selector 4: Detection of distinctive ringing pattern
If this selector is set to "0," the equipment detects only the number of rings; if it is set to "1,"
the equipment detects the number of rings and the ringing time length to compare the de-
tected ringing pattern with the registered distinctive one.
Selector 5: Automatic erasure of voice alarm
This selector determines whether or not the voice alarm should be erased from the memory
after it is issued.

WSW27

(Function setting 5)
Function
V – 39
Setting and Specifications
0: TEL key 1: TEL/POLLING key
0: YES 1: NO
0: OFF 1: ON
0: OFF 1: ON
0: YES 1: NO
0: YES 1: NO