Changing DVD preferences
You can change preferences only when the DVD
player is in stop mode.
To change DVD preferences:
1 While in DVD mode, make sure that your
TV/DVD combo is in stop mode.
2 Press SETUP. The
-- GENERAL SETUP PAGE --
TV DISPLAY
TV OUTPUT
CAPTIONS
SCREEN SAVER
LAST MEMORY
GOTO GENERAL SETUP PAGE
3 Press
or
to highlight
press OK/ENTER. The PREFERENCES PAGE opens.
icon is highlighted.
WIDE
YPbPr
OFF
ON
OFF
(preferences), then
www.insigniaproducts.com
4 Press
or
to highlight an option, then press
OK/ENTER. You can select:
• AUDIO—Changes the DVD audio language. If
the language you select is available on the
DVD, the audio is played in that language. If
the language you select is not available on the
DVD, the audio is played in the original
language.
• SUBTITLE—Changes the DVD subtitle
language. If the language you select is
available on the DVD, the subtitles are
displayed in that language. If the language
you select is not available on the DVD, the
subtitles are displayed in the original
language.
• DISC MENU—Changes the language for the
disc menu. If the language you select is
available on the DVD, the disc menu is
displayed in that language. If the language
you select is not available on the DVD, the disc
menu is displayed in the original language.
• DEFAULT—Resets the DVD player settings to
the default settings, including the parental
controls. It does not reset the password.
5 Press
or
to change the option, then press
OK/ENTER.
6 Press
one or more times to go back to the
previous menu.
7 To close the menu, press
icon, then press OK/ENTER.
to highlight the
43