Table of Contents
Advertisement
IMPORTANT
This device complies with Part 15 of the FCC
Rules.
SAFEGUARDS
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
• Installation and wiring of this product require spe-
and (2) this device must accept any interference
cialist skill and experience. To assure your safety,
received, including interference that may cause
please request a specialist technician to install the
undesired operation.
unit.
• Do not attempt to heat the surface of the camera
Information to User
lens or camera lens itself with a lighter and so on
Alteration or modifications carried out without
when they have become frozen. This can cause a
appropriate authorization may invalidate the user's
malfunction.
right to operate the equipment.
• This product is a rear view camera for checking
the view at the rear of a car.
If you want to dispose this product, do not
A rear view camera is a camera that provides sym-
mix it with general household waste. There
metrical images in the same way as rear and side
is a separate collection system for used elec-
view mirrors.
tronic products in accordance with legisla-
• Connection to a TV with an RCA video input is
tion that requires proper treatment, recovery
possible, but confirm whether the TV you use has
and recycling.
a reverse gear connection function.
• Direct sunlight or strong light (sunlight reflected
Private households in the 25 member states of the
from a bumper etc) on the camera may result in
EU, in Switzerland and Norway may return their
smear above and below the location where the
used electronic products free of charge to designated
light strikes, but this is not a malfunction.
collection facilities or to a retailer (if you purchase a
• This product is designed to supplement the driver'
similar new one).
s rear view, but the camera images do not show all
For countries not mentioned above, please contact
dangers and obstacles. Be sure to look behind you
your local authorities for the correct method of dis-
when reversing to confirm the view.
posal.
• This product features a wide-angle lens, so the
By doing so you will ensure that your disposed prod-
near view is wide and the far view is narrow,
uct undergoes the necessary treatment, recovery and
which may create a false sense of distance. Be
recycling and thus prevent potential negative effects
sure to look behind you when reversing to confirm
on the environment and human health.
the view.
• Do not wash your car with an automatic car wash
WARNING:
or high-pressure water as it may result in water
Handling the cord on this product or cords associated
entering the camera or the camera falling off.
with accessories sold with the product may expose
• Check camera stand installation before driving.
you to chemicals listed on proposition 65 known to
Are the screws loose?
the State of California and other governmental enti-
– Is the camera stand firmly secured?
ties to cause cancer and birth defects or other repro-
– If the rear view camera comes loose while you
ductive harm. Wash hands after handling.
are driving it may cause an accident.
Installation
Parts supplied
Installation Procedure
Rear view camera × 1
Note:
RCA power supply cable × 1
• Before making a final installation of the unit,
Power supply unit × 1
temporarily connect the wiring to confirm that
Hexagon wrench × 1
the connections are correct and the system works
Velcro tape (soft type) × 1
properly.
Velcro tape (hard type) × 1
Clamp × 10
• Use only the parts included with the unit to ensure
Waterproof pad × 1
proper installation. The use of unauthorized parts
Double-sided tape × 1
can cause malfunctions.
× 1
Camera stand bracket
• Consult with your nearest dealer if installation
requires the drilling of holes or other modifica-
Installation example (Fig. 1)
tions of the vehicle.
• Install the unit where it does not get in the driver'
Glass surface
s way and cannot injure the passenger if there is a
Make sure it doesn't touch the wiper
sudden stop, like an emergency stop.
Install on the center part
• When mounting this unit, make sure none of the
Changing the orientation of camera
leads are trapped between this unit and the sur-
rounding metalwork or fittings.
stand installation (Fig. 11-1)
• To prevent electric shock, do not install the power
supply unit in places where it might come in con-
The camera stand can be installed in
tact with liquids.
various ways by changing the direction in
• Do not mount this unit near the heater outlet,
which camera stand bracket
is attached
where it would be affected by heat, or near the
or attaching camera stand bracket
.
doors, where rainwater might splash onto it. (Never
Change to match your car's shape or the
install in locations such as the above because of
installation site.
the danger of malfunction due to high tempera-
tures.)
1. Use the hexagon wrench to remove
• Before drilling any mounting holes always check
the screws securing camera stand
behind where you want to drill the holes. Do not
brackets
and
. (Fig. 2)
drill into the gas line, brake line, electrical wiring
2. Change the direction of installation
or other important parts.
• If this unit is installed in the passenger compartment,
bracket
. (Fig. 3-1)
anchor it securely so it does not break free while the
3. Reattach with the screws.
car is moving, and cause injury or an accident.
• If this unit is installed under a front seat, make
Installing Using Camera Stand Bracket
sure it does not obstruct seat movement. Route
(Fig. 11-4)
all leads and cords carefully around the sliding
mechanism so they do not get caught or pinched
1. Use the hexagon wrench to remove
in the mechanism and cause a short circuit.
the screws securing camera stand
• Locate in the position you want to install the rear
brackets
and
. (Fig. 2)
view camera. Adjust the angle of the rear view
camera, and install so that the camera doesn't
2. Attach camera stand bracket
to
touch the car.
the camera stand. (Fig. 3-2)
• When sticking to a glass surface, stick it on in a
position that assures the camera doesn't touch the
3. Attach the rear view camera to cam-
rear window.
era stand bracket
. (Fig. 3-3)
• Install so that it does not obstruct the rear field of
4. Attach the camera stand and rear
view.
• Install so that it does not protrude from the side of
view camera. (Fig. 3-4)
the car.
Route the cables as shown in the figure so
• Do not perform installation in rain or fog.
that they do not become entangled.
• When humidity is high, dry the surface to which
Attach the camera stand while being care-
the unit is to be attached before installing. Moisture
ful not to mistake the vertical orientation
on the attachment surface reduces adhesive
of the rear view camera. (Fig. 7)
strength which may lead to the unit coming off.
<ENGLISH>
• If the temperature of the attachment surface is
5. Peel off the sheet on the back of they
low, warm with a hair dryer of other means before
camera stand and stick it on. (Fig. 8,
installing to improve adhesive strength.
Fig. 9)
• Do not attach the camera stand to areas on the car
Press the camera stand with your fingers to
body treated with fluorocarbon resin, or glass. This
may result in the rear view camera falling off.
stick it to the installation surface. Touching
• During the 24-hour period after installing:
the adhesive surface or sticking the unit
– Do not apply water to the unit.
on a second time reduces adhesive power
– Do not expose the unit to rain.
which may result in the unit coming off.
– Do not subject the camera to unnecessary force.
Camera stand
• Thoroughly clean where tape is used for sticking
When sticking to the center
on the unit.
When attaching using camera stand bracket
(attaching while rotating by 90°)
1. Clean the surface to which the rear
6. Adjust the angle so that the bumper
view camera is to be installed.
or rear edge of the car is displayed
(Fig. 4)
at the bottom of the TV screen.
Use a cloth or other item to wipe oil, wax,
(Fig. 10, Fig. 11-2, Fig. 11-3, Fig. 12)
dust and any other dirt from the installation
Angle of view
surface.
Horizontal: 135°
2. Remove the rear view camera from
Angle of view
the camera stand. (Fig. 5)
Vertical: 100°
Bumper or rear edge of car
Remove the mounting screws with the
hexagon wrench provided.
7. Attach the power supply unit.
Top
(Fig. 13)
Rear view camera
Affix the Velcro tape (hard type) to the
Bottom
bottom of the power supply unit, and affix
Installation screw
the Velcro tape (soft type) to the mounting
Camera stand
location.
3. Align the camera stand with the
Power supply unit
installation surface. (Fig. 6)
Velcro tape (hard type)
Velcro tape (soft type)
Adjust the camera stand so that there is no
space between it and the installation surface.
Turn
• You can use Velcro tape (hard type) to attach
Twist
directly to a carpet, but do not use the soft type.
Camera stand
• Install the power supply unit close enough
4. Attach the camera stand removed in
for the rear view camera cable to reach.
step 2 to the rear view camera with
the mounting screws. (Fig. 7)
The rear view camera has a mark indicat-
ing the top of the camera.
Attach the camera stand while being care-
ful not to mistake the vertical orientation
of the rear view camera.
Top
Bottom
Mark
PRECAUCIONES DE
Si desea deshacerse de este producto, no
lo mezcle con los residuos generales de su
SEGURIDAD IMPORTANTES
hogar. De conformidad con la legislación
vigente, existe un sistema de recogida dis-
• La instalación y cableado de este producto requiere
tinto para los productos electrónicos que
la habilidad y experiencia de un especia-lista. Para
requieren un procedimiento adecuado de
asegurar la seguridad, solicite un técnico especial-
tratamiento, recuperación y reciclado.
ista para instalar la unidad.
• No intente calentar la superficie del objetivo de
Las viviendas privadas en los 25 estados miembros
la cámara o el propio objetivo de la cámara con
de la UE, en Suiza y Noruega pueden devolver gra-
un encendedor o algo similar cuando los mismos
tuitamente sus productos electrónicos usados en las
estén congelados. Eso puede causar un fallo de
instalaciones de recolección previstas o bien en las
funcionamiento.
instalaciones de minoristas (si adquieren un producto
• Este producto es una cámara de vista posterior
similar nuevo).
para verificar la vista en la parte trasera de un
En el caso de los países que no se han mencionado
coche.
en el párrafo anterior, póngase en contacto con sus
Una cámara de vista posterior es una cámara que
autoridades locales a fin de conocer el método de
provee imágenes simétricas de la misma manera
eliminación correcto.
que los espejos retrovisores o laterales.
• Se puede hacer la conexión a un televisor con
Al actuar siguiendo estas instrucciones, se asegurará
entrada de vídeo RCA, pero compruebe si el tel-
de que el producto de desecho se somete a los pro-
evisor tiene una función de conexión de marcha
cesos de tratamiento, recuperación y reciclaje nec-
atrás.
esarios, con lo que se previenen los efectos negativos
• La luz directa del sol o luz fuerte (luz del sol refle-
potenciales para el entorno y la salud humana.
jada de un parachoques, etc.) en la cámara puede
producir una mancha por encima y por debajo de
la ubicación donde la luz radia, pero esto no es un
fallo de funcionamiento.
• Este producto ha sido diseñado para complementar
la vista trasera del conductor, pero las imágenes
de la cámara no muestran todos los peligros y
obstáculos. Asegúrese de mirar atrás cuando vaya
de marcha atrás para comprobar la vista.
• Este producto tiene una lente de gran angular y,
por lo tanto, la vista cercana es amplia y la vista
distante es estrecha, lo que puede crear una sen-
sación falsa de la distancia. Asegúrese de mirar
atrás cuando vaya de marcha atrás para comprobar
la vista.
• No lave su coche en un túnel de lavado automático
o agua de alta presión, ya que esto puede resultar
en la entrada de agua en la cámara o caída de la
cámara.
• Verifique la instalación del soporte de la cámara
antes de conducir el coche.
¿No están flojos los tornillos?
– ¿Está firmemente fijo el soporte de la cámara?
– Si la cámara de vista posterior se afloja mien-
tras está conduciendo, esto puede causar un
accidente.
- Quick Links:
- Installation
Hide quick links:
Advertisement
Table of Contents
