Sony HVRM25AU - Professional Video Cassete recorder/player Operating Instructions Manual page 24

Displaying Various Data
i Time counter (time code/user bits/count value of
the counter) indicator
Displays the count value of the counter, time code, or
user bits. By pressing the COUNTER SELECT button
on the front panel, you can select the item to be
displayed.
When the time code is displayed,
In the drop frame mode, a period is displayed between
the minutes and seconds (i.e., 00:12.58:00).
When the user bits are displayed,
left.
When the count value of the counter is negative, "–"
appears as the first digit (leftmost digit). When that
value is positive, the first digit is blank.
The count value of the counter consists of seven digits.
If the self-diagnostic function is enabled, diagnostics
code numbers are displayed.
Note
When you playback a tape without a time code or with
a time code recorded in different formats, the time code
cannot be displayed correctly.
j Remaining tape time indicator
Displays the remaining tape time.
For details, see " REMAINING" in the "DISPLAY SET"
menu on page 75.
Note
• The remaining tape time displayed is an estimated
time.
• When you insert a cassette of which the tape has been
rewound to the beginning, this indicator does not show
the remaining tape time. The remaining tape time is
displayed after the tape runs for a while.
k INPUT SELECT indicator
Changes according to the position of the INPUT
SELECT switch. ([HDV/DV IN], [S VIDEO IN] or
[VIDEO IN])
l (Index) indicator
Displays when an index has been marked.
m Search indicator
Displays the search mode when you search for scenes
using the Remote Commander.
For details on the search function, see "Searching using the
search function" on page 41.
24
Chapter 1 Overview
appears to its left.
TC
appears to their
UB
n Audio mode indicator
In the recording mode, displays
[FS32K] for [AUDIO MODE] in the [AUDIO SET]
menu.
When you select [FS48K],
During playback or audio dubbing, displays the audio
mode recorded on the tape. During i.LINK input,
displays the audio mode of the signal input to the
HDV/DV jack.
Notes
• The audio mode will not be displayed when [HDV/DV
SEL] in the [IN/OUT REC] menu is set to [HDV].
• Signals other than HDV/DVCAM lock mode will
become non-standard audio and
displayed during playback or when the signal is input
from the HDV/DV jack.
o Date/time indicator
When you press the DATA CODE button of the Remote
Commander or set [DATA CODE] in the [DISPLAY
SET] menu to [DATE], you can display the recording
date/time.
For details on the date/time indicator, see "Displaying
information (data codes) recorded on a tape" on page 39.
when you select
is displayed.
/ is