Connecting The Usb Cable To Your Pc - Toshiba PDR-3310 Instruction Manual

Installing the image software
<Installing Image Expert (Windows)>
1 Insert the attached CD-ROM into the CD-ROM drive.
2 Select "English".
3 Click "
Install Image Expert".
Follow the display instructions to proceed with setup.
<Installing Image Expert (Macintosh)>
1 Insert the attached CD-ROM into the CD-ROM drive.
2 Click "
Install Image Expert".
Follow the display instructions to proceed with setup.
3 Select "English".
Installing the movie play software
<Installing the Quick Time (Windows)>
1 Open the CD-ROM using the Explorer software or the like.
Sample procedure: Move the mouse pointer on the CD-ROM icon, click
the right button on the mouse and select the [Open (O)].
2 Open the "QuickTim" folder.
3 Open the "English" folder.
4 Double-click the "QuickTim.exe" icon
5 Follow the display instructions to install the QuickTime.
< Installing the Quick Time (Macintosh)>
Check the version of your Macintosh QuickTime.
When the version is 4.0 or later, you don't need follow the steps below.
1 The icon of the CD-ROM "PDR-3310" appears on the desktop.
2 Double-click the "PDR-3310" icon.
3 Open the "QuickTime" folder
4 Open the "English" folder.
5 Double-click the "QuickTime Installer".
6 Follow the display instructions to install the QuickTime.
94

Connecting the USB Cable to your PC

You need to use the exclusive USB cable to connect TOSHIBA PDR-
3310 to your PC.
<Caution>
Make sure the sizes of the USB jacks. The smaller jack will be inserted into the
camera, and the bigger one will be inserted into the PC.
PDR-3310
Exclusive
USB cabel
To the DIGITAL
connector To the
USB port
Push until
you hear the
jack clicks
Once you connect the USB cable to the camera, [PC MODE] will
appear on the LCD screen; then you will be able to work on your PC.
¶ At this time, the self-timer LED flashes.
To the
USB port
PC
95