Table of Contents
Advertisement
<Adjusting the Preset Value>
Use this function to manually set the white balance value. It allows you
to select what part of the subject you wish to serve as the standard for
"white" in the final image. For more exacting settings, use of a piece of
white paper or cardboard is recommended.
¶ Electronic zoom must be disabled when setting the preset white balance
value.
<Operation>
1 Press "MENU" button.
2 Press the "#" button and
select [
], then press the
"
" button to display
[SETTING DETAILS] menu.
3 Press the "%" or "fi"button to
select [WB PRESET], then
press the "#" or "
" button.
44
4 Point the camera at the white
part of the subject or other
material you wish to serve as
the white standard in the
image.
Make sure the white material fills
up the entire screen as shown.
5 Press "
" to finish the setting.
[SETTING DETAILS] menu will
appear again.
6 Press "MENU" button.
[SETTING DETAILS] menu will
disappear.
The screen
displayed
after preset.
7 Following the Operation on
pages 43, select [PRESET] and
then press the shutter release
button to take a picture.
45
Advertisement
Table of Contents
