Using The Usb Cable (Windows 98/2000/Me/Xp) - Toshiba PDR-3320 Software Manual

Using the USB Cable (Windows 98/2000/ME/XP)

To enable importing of images on the PDR-3320 to your personal computer, the PDR-3320 must be connected to
your personal computer by the USB cable(provided).
When you connect the PDR-3320 to your personal computer by the USB cable, the connection can only be made with
both the PDR-3320 and your personal computer turned ON. The USB connection will be automatically recognized by
the computer.
Connectable personal computer: Windows 98/2000/ME/XP pre-installed machine
IMPORTANT
If the camera's power is turned OFF while image data is being transferred to the PC, the data may be
damaged. When the PDR-3320 is connected to the personal computer, use the AC adapter.
Connect one end of the USB cable to the DIGITAL terminal on the PDR-3320.
Connect the large end of the USB cable to the USB port on your personal computer.
Perform the following operation with Windows 98/2000/ME/XP already booted up.When
the
connected.
If this is the first time for an image to be imported using the USB cable, the Add New
Hardware Wizard screen appears. Install the USB driver.
<When using Windows 98>
Refer to installing the USB driver on page 11
<When using Windows 2000/ME/XP>
Follow the on-screen instructions to perform the driver installation.
It is added as a Removable Disk as the standard Windows 2000/ME/XP driver is installed.
12
icon appears on the Windows task bar, it means the USB cable is successfully