Troubleshooting Guide - Sanyo VPC S6 - Xacti Digital Camera Instruction Manual

TROUBLESHOOTING GUIDE

Symptom Possible causes
Power does not * The battery has run out.
turn on. * The battery is not oriented correctly.
* The battery cover is not closed
properly.
Camera * The function of [Auto Shut
suddenly powers Down] in the
down. been activated.
* The battery has run out.
Image is not * The camera is in the
captured when the mode.
shutter release * Memory is full.
button is pressed.
Flash does not * Flash off is selected in flash
fire. mode.
* 10+2 sec. Self-timer is selected
in self-timer mode.
* The [Capture Mode] is set to
[Burst] or [AEB].
* The camera is in the
mode.
Continuous * The capacity of the built-in
shooting is not memory or SD/SDHC memory
possible. card is full.
Cannot transfer * USB cable is not connected
files over a USB securely.
connection. * USB driver is not installed.
* Camera is turned off.
Solutions / Corrective Actions
* Load new or fully charged battery.
* Load the battery in the correct direction.
* Close the battery cover correctly.
* Turn the power back on and set the option of [Auto Shut
mode has Down] to [Off].
* Load new or fully charged battery.
or * Rotate the mode dial to
.
* Transfer the desired files to your computer and then delete
unnecessary files, or use a different memory card.
* Select a different flash mode.
* Select [Single] in the [Capture Mode].
* Switch the mode dial to another mode.
(video)
* Insert SD/SDHC memory card with available space or
delete unwanted images.
* Check all connections.
* Install the USB driver on your computer.
* Turn on the camera.
, , , , ,
EN-67
or