Table of Contents
Advertisement
TROUBLESHOOTING GUIDE
Symptom
Power does not
turn on.
Camera
suddenly
powers down.
Image is not
captured when
the shutter
release button
is pressed.
Flash does not
fire.
Continuous
shooting is not
possible.
Cannot transfer
files over a USB
connection.
Possible causes
* The battery has run out.
* The battery is not oriented
correctly.
* The battery cover is not
closed properly.
* The function of [Auto Shut
Down] in the
been activated.
* The battery has run out.
* The camera is in the
mode.
* Memory is full.
* Flash off is selected in flash
mode.
* 10+2 sec. Self-timer is
selected in self-timer mode.
* The [Capture Mode] is set
to [Burst] or [AEB].
* The camera is in the
(video) mode.
* The capacity of the built-in
memory or SD/SDHC
memory card is full.
* USB cable is not connected
securely.
* Camera is turned off.
Solutions / Corrective Actions
* Load new or fully charged battery.
* Load the battery in the correct
direction.
* Close the battery cover correctly.
* Turn the power back on and set
mode has
the option of [Auto Shut Down] to
[Off].
* Load new or fully charged battery.
or
* Rotate the mode dial to
,
* Transfer the desired files to your
computer and then delete
unnecessary files, or use a
different memory card.
* Select a different flash mode.
* Select [Single] in the [Capture
Mode].
* Switch the mode dial to another
mode.
* Insert SD/SDHC memory card with
available space or delete
unwanted images.
* Check all connections.
* Turn on the camera.
,
,
or
.
,
,
EN-61
Advertisement
Table of Contents
