Sanyo VPC S6 - Xacti Digital Camera Instruction Manual page 71

Step Figure
100-0008 100-0008 100-0008
2
Select : Print :
Cancel : Set :
Print Info Print Info Print In
Quantity Quantity Quantity 10 10 10
Date Date Wit ith With
3 File Name File Name File Name Wit ith With
Cancel : Cancel : Cancel : Select : Select : Select :
100-0008 100-0008 100-0008
4
Select : Print :
Cancel : Set :
Print Print Pape Print Paper per
Size Si Size Standard Standar r d d Standa
Borde Bo Borderless derles less Standar r d d Standa Standard
5
Total Total 3 otal 3
Cancel : Cancel : Cancel : OK : OK : OK :
EN-70
Procedure
Use the four-way controller (
press the four-way controller ( ) to set more detailed settings.
Use the four-way controller (
button.
[Quantity]: Specifies the number of prints. You can select the number up to
10.
[Date]: If you select [With], images are printed with the date.
[File Name]: If you select [With], images are printed with the file name.
After Print Setting is set, the print icon
You can still use the four-way controller (
preference, then press the
Use the four-way controller (
press the button to confirm.
[Size]: You may select the desired item depending on the type of printer being
used.
[Borderless]: You may select the desired item depending on the type of printer
being used.
) to select the image you want to print, then
) to select by your preference, then press the
is marked on the displayed image.
) to change the image by your
button to print.
) to access the paper selection setting, then