Using The Zoom - Sanyo VPC S6 - Xacti Digital Camera Instruction Manual

USING THE ZOOM

Your camera has two zoom functions: optical zoom and digital zoom.
1
Set the camera to the shooting
mode (page 26), and point the
camera lens at the subject.
2
Press the zoom switch to
compose the desired image.
[T]: Zoom in on the subject.
[W]: Zoom out.
h When the zoom switch is
pressed, the zoom bar appears
on the monitor.
h When the optical zoom factor is
at maximum, zooming stops
temporarily. When [T] on the
zoom switch is pressed again,
the mode changes to the digital
zoom mode and zooming
continues.
3
Take the picture.
HINT
Can't access the digital zoom?
i When the resolution is set to k, the digital zoom is not available in the
single-shot mode.
Can't access the optical zoom?
i During video clip recording, only the digital zoom is available, and the
optical zoom cannot be used.
47
English
Zoom switch
Monitor
When both optical
and digital zoom are
enabled
Optical zoom
Digital zoom (yellow)
When optical zoom
only is enabled
Zoom bar
Pointer