For Mac Os 9.Xx Users; For Mac Os X Users - Sanyo VPC S6 - Xacti Digital Camera Instruction Manual

For MAC OS 9.xx users

Mounting your camera
1 Set the camera to the card reader mode (page 10).
h The camera is recognized as a drive and appears as an icon named
[Untitled] on the Desktop.
h Double-click on the [Untitled] icon, and you can process the contents
of the card installed in your camera exactly like you would the data in
the other computer drives.
Dismounting the camera
CAUTION
i To disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1 Drag the [Untitled] icon for your camera on the Desktop to the
trashcan.
h The [Untitled] icon disappears from the Desktop.
h You can now disconnect your camera.

For MAC OS X users

Use the same mounting and dismounting procedure as for the MAC OS
9.xx. However, if an application which automatically recognizes camera
images is installed, it will be activated.
16
English