For Windows 98/98Se Users - Sanyo VPC S6 - Xacti Digital Camera Instruction Manual

For Windows 98/98SE users

Mounting your camera
For Windows 98 and Windows 98SE users, please install the USB driver
(SANYO Digital Camera Mass Storage Driver and SANYO Digital Camera
Controller). Install the SANYO Digital Camera Mass Storage Driver before
installing the SANYO Digital Camera Controller.
1 Insert the CD-ROM (SANYO Software Pack) in your computer's CD-
ROM drive.
2 Set the camera to the card reader mode (page 10).
h The [Add New Hardware Wizard] dialog box will open.
h If the [Add New Hardware Wizard] dialog box does not appear,
double-click on the [Add New Hardware] icon in the [Control Panel] to
open it, and proceed to step 3.
3 Click on the [Next] button.
4 Specify the USB driver search method and search location.
1 Place a check in the [Search for the best driver for your device.
(Recommended)] checkbox, and click on the [Next] button.
2 Place a check in the [Specify a Location] checkbox, and click on the
[Browse] button.
h The [Browse for Folder] dialog box will open.
5 Specify the folder that has the USB driver.
h The USB driver is in the CD-ROM's [Usb] folder, in the [Win98] folder.
1 Double-click on [Sanyodsc (D:)].
h "(D:)" denotes the CD-ROM drive name, which may be different on
your computer.
2 Double-click on [USB].
3 Double-click on [Win98].
6 Click on the [OK] button.
h The [Browse for Folder] dialog box closes, and [D:\USB\WIN98]
appears in the [Specify a location:] field. The first character (D) may
vary depending on your computer configuration.
13
English