Creating A Standard Windows Pe - Dell External OEMR 2850 User Manual

4 Copy factory.exe and netcfg.exe from <cd-drive>:\tools\x86 directory to
the \WinPE_OPKTools directory.
5 Remove the Windows OPK CD or Windows PE CD from the CD drive.

Creating a Standard Windows PE

For building a standard Windows PE with OPK tools, refer to the help files
available on the OPK CD. You can get to the help files after you install OPK
on your development system. Brief instructions are provided here on how to
build a standard Windows PE.
NOTE:
You must have read-write permissions on your development system.
You cannot run mkimg.cmd from a read-only device, such as a CD drive.
1 Create and name a directory on your development system hard drive such
as \DellWinPEBuild. This directory serves as a <destination_directory>
used with mkimg.cmd to create Windows PE.
2 Insert the 32-bit Windows Server
CD drive.
3 Open a command prompt and navigate to the \WinPE_OPKTools
directory you created earlier.
4 Run the command: mkimg.cmd <source_directory>
<DellWinPEBuild> /PNP /WMI.
NOTE:
the
/WMI
NOTE:
DTK tools to run properly.
78
Running Deployment Scripts Using DTK and Microsoft Windows PE
The option enables support for Plug and Play device drivers;
/PNP
option enables support for Windows Management Instrumentation.
Ensure that you include the
®
2003 (with SP1) product CD into the
option with mkimg.cmd for the
/WMI