These files can then be accessed from this directory when deploying multiple
PowerEdge 2850 systems. For more information about obtaining Dell utility
partition files, see "How to Obtain Dell Utility Partition Files."
This directory can also be subdivided into multiple system-specific directories such
as: /opt/dell/toolkit/systems/pe2850 for Dell PowerEdge 2850 systems and
/opt/dell/toolkit/systems/pe1850 for Dell PowerEdge 1850 systems. See Figure 7-3.
NOTE:
You should mount the network share on to the target system in the master
deployment file you created.
NOTE:
If you choose to create a directory structure for the system-specific files that is
different from the one suggested in this guide, be sure to carefully review and edit each
sample script (where necessary) to reflect the different directory structure.
Figure 7-3. DTK System-Specific File Structure
104
Preparing the Directory Structure for Deployment in Embedded Linux