Dell External OEMR 2850 User Manual page 34

Perform the following steps to extract the DTK components to a workstation
running Windows:
1 Download the DTK file DTK3.X-WINPE-XX.exe from the Dell Support
website at support.dell.com and save it anywhere on your system.
2 After the file downloads, double-click the file.
3 Click OK.
4 Click Unzip.
By default, files are unzipped to C:\. You can unzip the DTK components
to your local hard drive and then copy them later to a network volume,
or you can change the installation path to an available network share.
For example, you can unzip the files directly to the network share
(for example, Z:\) that you plan to use in the deployment process.
NOTE:
volume. The DTK network-based deployment is not supported from mapped
Novell NetWare systems. The DTK utilities do not run in Windows PE when
Novell's Client32 is loaded.
The files are unzipped in the directory structure shown in Figure 3-1.
34
Preparing the Directory Structure for Deployment in Microsoft Windows PE
Do not copy the DTK components to a Novell
® ®
NetWare network