Table of Contents
Advertisement
Displaying the Deregistration Code
1
Touch [Warranty/Copyright Info.].
2
Touch [DivX(R) VOD].
3
Touch [Deregistration].
The confirmation dialog screen appears.
4
Touch [OK].
The deregistration code is displayed on the screen.
• When you have finished, touch [Cancel]. If you want to continue and
display a new registration code, touch [OK], check the registration
code, and then touch [OK] again.
Initializing the System
You can initialize all data, to restore the factory settings. Remove the
CD/DVD disc, etc. from the system before operation
Setting item: Restore Factory Setting
1
Touch [Restore Factory Setting].
2
After the confirmation message appears, touch
[OK].
The confirmation screen appears again.
3
Touch [OK].
The system starts initialization.
• Do not turn on/off the power or change the ignition key position until
system restart is completed.
• Do not detach the front panel by pressing the
until system restart is complete.
Installation Setup
[Installation] is selected on the General setup menu in step 3. See
"General Setup Operation" (page 37).
Setting item: Installation
The Installation check screen is displayed.
42
-EN
Sound Setup
Sound Setup Operation
To display the Sound Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Sound mode operation has been
released. Engaging the parking brake can reactivate the Sound
Setup Menu, as long as the car's ignition has not been turned off.
It is not necessary to repeat the above procedure
(1 through 3) of "To display the Sound mode screen."
Each time the ignition is turned OFF, perform the procedure of "To
display the Sound mode screen."
The following steps 1 to 5 are common operations to each
"Setting item" of Sound Setup. Refer to each section for details.
1
(Release) button
2
3
Setting items: Balance / Fader / Subwoofer / Media Xpander /
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
Touch [Sound].
The Sound Setup screen appears.
Select the desired item.
Bass Max EQ / Parametric EQ / Time Correction /
X-OVER / Defeat / Volume / Source Volume Setup
Hide quick links:
Advertisement
Table of Contents
