Tascam HD-R1 Technical Information page 19

Location=2.0
Location=100.
Location=1:2.3
Location=1:2
4. Delete tracks
Input a command like one of the following. (Enter "{folder\}" only when necessary.)
Command character string
Delete Track=cf:{folder\}filename.ext
Delete Track=usb:{folder\}filename.ext
The HD-R1 responds as follows.
delete track!Resend to confirm
Resend the previously input command within 60 seconds.
Delete Track=cf:{folder\}filename.ext
or
Delete Track=usb:{folder\}filename.ext
The track will be deleted unless there is an error.
5. Reformat media
Input a command like one of the following.
Command character string
Format Media=cf
Format Media=usb
The HD-R1 responds as follows.
format media!Resend to confirm
Resend the previously input command within 60 seconds.
TASCAM HD-R1 RS-232C Protocol Specifications
When only a decimal point is used, the setting is made in
units of seconds. In this example, the result is 2 seconds.
As above, this example results in 100 seconds. This is the
same result as entering "1:40".
This is 1 minute and 2.03 seconds, which the same result as
entering "01:02.03".
This is 1 minute and 2 seconds, which is the same result as
entering "01:02.00".
19 TEAC Corporation