Tascam HD-R1 Technical Information page 15

4.3 Checking playlists and folders
These commands allow you to check which playlists and folders can be used currently. The following are concrete
examples.
1. Check the total number of playlists
Use this to check how many playlists are on the currently inserted CF card.
Query
Command
Num Of Playlists?
This shows that there are three playlists on the CF card.
2. Check the playlist name
Please note that playlists are in alphabetical order.
Query
Command
Playlist Name?1
This shows that the name of the first playlist is "Jazz".
Use this command to check the name of the second playlist.
Query
Command
Playlist Name?2
This shows that the name of the second playlist is "Rock".
3. Name a playlist
Input a command like the following to set the name of the playlist.
Command character string
Playlist Name=Rock
This will name the playlist unless there is an error.
4. Add a playlist number
Input a command like the following to set the number of a playlist.
Command character string
Playlist Number=2
The setting will be made unless there is an error.
TASCAM HD-R1 RS-232C Protocol Specifications
HD-R1 response
Num Of Playlists=3
HD-R1 response
Playlist Name=Jazz
HD-R1 response
Playlist Name=Rock
15 TEAC Corporation