Nail Selection - Hitachi NT65GA - 2-1/2" Gas Powered 34 Angled Finish Nailer Instruction And Safety Manual

English

NAIL SELECTION

Be sure to use only the genuine
HITACHI nails for the NT65GS,
NT65GB, NT65GA or the NT50GS. The
use of any other nails can result in tool
malfunction and/or nail breakdown,
leading to serious injuries.
Only nails shown in the Table below can be
driven with this Nailer.
Dimensions of nails
<NT65GS>
16 Gauge finish nails
(straight)
<NT65GB>
16 Gauge finish nails
(Angle: 20°)
16
WARNING
.110" (2.8mm)
.110" (2.8mm)
Min.
.055" .065"
(1.4mm) (1.65mm)
Min.
.055" .065"
(1.4mm) (1.65mm)
Max.
Max.