Specifications - Hitachi NT65GA - 2-1/2" Gas Powered 34 Angled Finish Nailer Instruction And Safety Manual

SPECIFICATIONS

1. Gas Finish Nailer
Model
Dimensions
Length × Height × Width
Weight
Includes battery and fuel cell
Nail capacity
Cycle rate
Battery
Fuel Cell
2. Gas Brad Nailer
Model
Dimensions
Length × Height × Width
Weight
Includes battery and fuel cell
Nail capacity
Cycle rate
Battery
Fuel Cell
3. Battery Charger (UC3SML)
Input power source
Charging time
Charger
Weight
NOTE: The charging time may vary according to temperature and power source voltage.
NT65GS
10-1/4" × 11" × 3-3/8"
(260 mm × 278 mm × 85 mm) (268 mm × 282 mm × 85 mm) (307 mm × 305 mm × 126 mm)
3.7 lbs. (1.7 kg)
4.0 lbs. (1.8 kg)
100 nails (2 strips)
Intermittent: 2 nails per second
Continuous: 1,000 nails per hour
Type No. 728-981 ...... sold separately
Type No. 728-981 ...... sold separately
DC 12V
Approx. 60 minutes ................................... EBM315
Charging voltage ........................................ DC 3.6 V
Charging current ........................................ DC 1.5 A
0.4 lbs (0.2 kg)
NT65GB
10-5/8" × 11-1/8" × 3-3/8"
EBM315 (1.5 Ah)
Li-ion battery, 3.6 V
NT50GS
10-5/8" × 11-1/8" × 3-3/8"
(270 mm × 281 mm × 85 mm)
3.7 lbs. (1.7 kg)
4.0 lbs. (1.8 kg)
100 nails (1 strip)
Intermittent: 2 nails per second
Continuous: 1,000 nails per hour
EBM315 (1.5 Ah)
Li-ion battery, 3.6 V
English
NT65GA
12" × 12" × 5"
4.2 lbs. (1.9 kg)
4.4 lbs. (2.0 kg)
100 nails (1 strip)
Intermittent:
1 nail per second
Continuous:
900 nails per hour
15