Push Stick Pattern - Hitachi C10RA3 - 10 Inch Portable Table Saw Instruction Manual

English
PUSH STICK CONSTRUCTION
● This is a full-size drawing (actual size)
● Use good quality plywood or solid wood
● Use 1/2 in. or 3/4 in. material
● Push stick MUST be thinner than the width
of material being cut
Cut Here To
Push 1/2 in.
Wood
Cut Here To
Push 3/4 in.
Wood
– 24 –
Drill Hole For
Hanging
Notch To Prevent
Hand From
Slipping