Directing The Display Output When You Turn On The Computer - Toshiba M205-S810 - Portege - Pentium M 1.5 GHz User Manual

116
Expansion Options
Using external display devices

Directing the display output when you turn on the computer

Once you've connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously.
Using the Display Hot key
The quickest way to change the display output settings is to
use the display hot key (
1 Press
2 While holding down
setting you want takes effect.
This hot key cycles through the settings in the following
order:
❖
❖
❖
3 Release the
Using the Cross-Functional button
The Cross-Functional button is located on the front of the
display (the first left button) and the external display device
can be selected by pressing and holding the Cross-Functional
button for two seconds until the external display screen displays.
For more information, see
and simultaneously.
Fn F5
Built-in display panel only
Built-in display panel and external monitor
simultaneously
External monitor only
key.
Fn
TECHNICAL NOTE: You can also change these settings using
the Display Properties Box.
+ ):
Fn F5
, press repeatedly until the
Fn F5
"Cross Menu Utility" on page 173.