1.3 Installing MicroSD card
®
You need a MicroSD
To install the MicroSD card
1. Insert the MicroSD card as shown. Make
sure the gold contacts are facing down.
To remove the MicroSD card
1. For safe removal, tap
> Storage > Unmount card.
2. Push to eject the MicroSD card from the
slot.
NOTE: Do not remove the MicroSD card while the device is turned on. Sudden
removal of the MicroSD card may cause data loss or unpredictable system
hang up.
1.4 Charging Battery
The battery is only partially charged. To fully charge the battery, charge it for 3 hours.
NOTE: The LED indicator will turn to blue when fully power charged.
Charge the battery
1. Connect one end of the AC adaptor to the DC IN port
of the device.
2. Plug the other end of the AC adaptor to the wall outlet
to start charging.
When the battery is charging and the device is turned on,
the
icon is displayed on the status bar. When the
battery is fully charged, the
status bar.
card to store photos, music, videos, and other data.
> Settings
icon is displayed on the
3
Insert the microSD card
towards the direction
indicated by arrow.
Need help?
Do you have a question about the ViewPad E72 and is the answer not in the manual?