Installing Memory Card; Charging Battery - ViewSonic ViewPad 7x User Manual

1.3 Installing Memory Card

®
You need a microSD
To install the memory card
1. Open the card cover.
2. Insert the microSD card as shown. Make sure
the gold contacts are facing down.
To remove the memory card
1. For safe removal, tap
Storage > Unmount SD card.
2. Open the card cover.
3. Push to eject the microSD card from the slot.
NOTE: Do not remove the memory card while the device is turned on. Sudden
removal of the memory card may cause data loss or unpredictable system
hang up.

1.4 Charging Battery

The battery is only partially charged. To fully charge the battery, charge it for 2 hours.
Charge the battery
1. Connect one end of the AC adaptor to the DC
jack of the device.
2. Plug the other end of the AC adaptor to the
wall outlet to start charging.
When the battery is charging and the device is
turned on, the icon is displayed on the status
bar. When the battery is fully charged, the
is displayed on the status bar.
card to store photos, music, videos, and other data.
> Settings >
3
icon