Alliance Laundry Systems 25 Operation/Programming/Maintenance
Alliance Laundry Systems 25 Operation/Programming/Maintenance

Alliance Laundry Systems 25 Operation/Programming/Maintenance

Alliance laundry systems 25, 30 and 35lbs gas drying tumblers p/n 70400201 operation, programming and maintenance instructions

Advertisement

Drying Tumblers
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
25 Pound Capacity
30 Pound Capacity
35 Pound Capacity
Stacked 30 Pound Capacity
Through Serial No. 0602004143
Refer to Page 5 for Model Numbers
www.comlaundry.com
Part No. 70400201
September 2006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 25 and is the answer not in the manual?

Questions and answers

Summary of Contents for Alliance Laundry Systems 25

  • Page 1 Drying Tumblers Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) 25 Pound Capacity 30 Pound Capacity 35 Pound Capacity Stacked 30 Pound Capacity Through Serial No. 0602004143 Refer to Page 5 for Model Numbers www.comlaundry.com...
  • Page 3 These instructions must be posted in a prominent location. Step-by-step instructions of the above safety information must be posted in a prominent location near the tumbler for customer use. 70400201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT MISE EN GARDE POUR VOTRE SÉCURITÉ, veillez à bien respecter les indications de ce manuel afin de minimiser les risques d’incendie ou...
  • Page 4 Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 70400201...
  • Page 5: Table Of Contents

    All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. 70400201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Introduction... Model Identification ...
  • Page 6 Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 70400201...
  • Page 7: Model Identification

    CHD35G2-CU035N DR35G2-BA035L Includes models with control suffixes: 3O – DX4 OPL 3V – DX4 vended 3X – DX4 prep for coin 70400201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Introduction DR25G2-BA025N CHD25S2-CT025S DR25G2-BT025L CHD25S2-CU025S DR25G2-BT025N...
  • Page 8: Customer Service

    (psi) 6.895 28.32 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Serial Plate Location When calling or writing for information about your product, be sure to mention model and serial numbers. Model and serial numbers are found on serial plate on rear of machine, and inside door hinge.
  • Page 9: Safety Information

    70400201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety Information IMPORTANT: Warranty is void unless tumbler is installed according to instructions in the Installation Manual.
  • Page 10: Important Safety Instructions

    © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 14. The interior of the tumbler and the exhaust duct should be cleaned periodically by qualified service personnel.
  • Page 11 28. DO NOT operate the tumbler if it is smoking, grinding, has missing or broken parts. 70400201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 29. DO NOT bypass any safety devices. 30. Solvent vapors from dry-cleaning machines create acids when drawn through the heater of the drying unit.
  • Page 12 Notes 70400201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 13: Operating Instructions

    DOES NOT remove all electrical power from machine. 70400201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT WARNING Operating Instructions Step 1: Clean Lint Screen/Compartment Remove any accumulated lint from the lint screen and compartment.
  • Page 14: Control Instructions

    3. Press the PUSH TO START button and hold it for approximately three (3) seconds. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT SELECT TEMPERATURE TEMP...
  • Page 15: Manual Timer

    4. Press the PUSH TO START button in and hold it in for approximately three seconds. This starts the tumbler cycle. 70400201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT HEAT HIGH PUSH START...
  • Page 16: Diagnostic Microprocessor Control

    RPM display – when equipped with rotational sensor only Monitors the lint door switch operation Monitors the thermistor for operation © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Cool Time (Min.) Table 1 The minimum drying time is 0 minutes, and the minimum cooling time is 2 minutes.
  • Page 17: Dmp Coin

    COOLING LED. Illuminated when in the cooling cycle or when the display is currently showing the time for the cooling cycle. START. Starts or resumes the current program or cycle Temperature Select. This button toggles through the three temperature selections. 70400201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT MINUTES HIGH MEDIUM TEMP PERM.
  • Page 18 2. An LED will be on to indicate which parameter is flashing on the display. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 3. The hidden front panel increment and decrement keys are used to change the value.
  • Page 19: Dmp Opl Models

    COOLING LED. Illuminated when in the cooling cycle, or when the display is currently showing the time for the cooling cycle. TEMPERATURE LED. Illuminated when the display is showing the temperature setting. 70400201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT DRYING COOLING TEMPERATURE...
  • Page 20: Dip Switch Settings

    “ON” indicates that the buzzer will sound continuously until the STOP button is pressed or the loading door is opened. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Coin Table 2 7. Safety Tumble (OPL) or Coin count/Pay (Coin): If DIP switch #1 is set for OPL, then DIP switch #7 in the ON position enables the safety tumble.
  • Page 21 REV (not illuminated). (Only for tumblers with the reversing option.) 70400201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Operating Instructions 14. To cancel this temporary programming mode push the STOP button once to stop the current cycle and once more to cancel the modified program settings.
  • Page 22 2 minutes for a total of 20 minutes, until some function of the tumbler is activated/deactivated by the user. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Operational Check for the Board Diagnostics 1. “dor” indicates that the loading or lint door is open.
  • Page 23: Maintenance

    70400201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Maintenance WARNING c. Be sure the lint screen is not torn. If it is, replace immediately.
  • Page 24 • Whenever ground wires are removed during servicing, these ground wires must be reconnected to ensure that the tumbler is properly grounded. 25, 30 AND 35 POUND Lint Screen Guard Cabinet Thermostat © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT WARNING TMB2121N TMB2121N Thermistor Blower Housing...
  • Page 25: Monthly

    4. Check flow of combustion and ventilation air. 5. Check belt tension and condition. Replace worn or cracked belts. 70400201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT WARNING Bi-Annually 1. Check mounting hardware for any loose nuts, bolts or screws.
  • Page 26 Lint buildup will act as an insulator, causing machine to overheat. Clean lint and debris buildup from blower to maintain proper airflow, to avoid overheating and prevent possible vibration. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT WARNING W002 70400201...
  • Page 27 Check cylinder and front panel seals. Inspect cabinet and inner panels for any damage, replace or repair as needed. Clean burner tubes of any lint buildup. 70400201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT WARNING Maintenance W002...
  • Page 28: Before You Call For Service

    For technical assistance, call (920) 748-3121. 70400201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Possible Reason – Corrective Actions Insert correct coin(s) or valid card if applicable. Close the loading door tightly.

Table of Contents

Save PDF