Installing The Peripheral Bay - Dell PowerEdge 2500 Installation Manual

F i g u r e 1 - 2 . I n s t a l l i n g t h e D r i v e C a g e ( To w e r S y s t e m )
Secure the drive cage to the peripheral bay with four screws (two on the top and two
3
on the bottom).
Figure 1-2 shows the proper location for these screws.

Installing the Peripheral Bay

Reconnect the interface cable to the CD-ROM/diskette drive interposer board.
1
While grasping the peripheral bay handle, lower the peripheral bay into the chassis.
2
1-4 1 x 2 Backplane K it Inst al lat ion Gui de
6-32 x 0.25-inch hex-
head Phillips screws (4)