Removing The Peripheral Bay - Dell PowerEdge 2500 Installation Manual

Removing the Peripheral Bay

Remove the front fan assembly (see "Removing the Front Fan Assembly" in your
1
Installation and Troubleshooting Guide).
Disconnect the interface cable from the interposer board attached to the back of the
2
CD-ROM/diskette drive.
Loosen the thumbscrew securing the peripheral bay to the chassis (see Figure 1-1).
3
F i g u r e 1 - 1 . R e m o v i n g t h e P e r i p h e r a l B a y
removable
peripheral bay
1-2 1 x 2 Backplane K it Inst al lat ion Gui de
thumbscrew