Using the ArcSoft Application software for
ELPDC06
This section explains how to operate the unit when it is connected to a computer.
In the following explanations, unless otherwise noted, Windows screen shots are used.
However, the screens will be similar even when using Macintosh.
Installing the Software
Note the following points before installing the software:
v Quit all programs that are currently running before installing the software.
v For users of Windows XP/Vista, install the software as a user with administrator rights.
v See the Appendix for the operating environment necessary for the software.
Procedure
For Windows
A
Insert the CD-ROM into the computer to start the installation for ArcSoft
Application software for ELPDC06.
B
When you see the license agreement, click "Yes".
C
Follow the instructions to install the software.
D
When the installation complete screen appears, click "Finish".
ELPDC06 Button Manager must also be installed. Do not clear the check box.
E
Install ELPDC06 Button Manager.
When you see the license agreement, click "Yes".
F
Follow the instructions to install the software.
G
When you click "Finish", the installation is complete and the
on the computer desktop.
10
icon appears