Summary of Contents for Epson DC-10s - Document Camera
Epson DC-10s ® Quick Setup Follow the instructions in this guide for basic steps on connecting and using the DC-10s document camera. For additional features and information, see the DC-10s User’s Guide. The DC-10s document camera comes with these parts:...
Setting Up Your Presentation 1 Connect the document camera Connect the document camera to a projector or other video display device: Document Camera Projector S-Video port VGA port (out) Use a VGA cable (included) or an S-video cable. Connect the cable to one of the ports shown above.
2 Plug in and turn on Connect the power adapter as shown. Plug the adapter into a wall outlet. Press the Power button to turn on the document camera. Turn on your projector or video display device. 3 Extend the arm Raise the camera arm and rotate the camera head...
4 Place your document Place your document on the table under the camera head. Orient it either way as shown. Press the lamp button to illuminate your document. Lamp button Image rotation dial Focus button Turn the dial on the camera head to orient the image on the screen. Press the Focus button.
Using the Control Panel The control panel lets you access commonly used features: Press to freeze the image. Press to view the on-screen menu. Use the arrow buttons to adjust settings. Press and hold to save the image in internal memory. or on an SD ™...
(800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). Epson is a registered trademark and Epson Exceed Your Vision is a logomark of Seiko Epson Corporation. PrivateLine is a registered trademark and Epson Store is a service mark of Epson America, Inc.