Administrator Security Functions; Turning The Enhanced Security Mode On/Off - Konica Minolta bizhub PRO C6000L User Manual

2.4

Administrator Security Functions

2.4 Administrator Security Functions
The administrator turns ON/OFF the Enhanced Security mode from the Utility Menu Screen. For that opera-
tion, a CE authentication password and administrator password should be set up on the machine. Ask your
service representative to set up an administrator password. Once specified, the password can be changed
by the administrator himself/herself. (For details on changing the administrator password, see Section 6 of
the User's Guide - POD Administrator's Reference.)
To protect the data on the machine from leakage or tampering, please be sure to designate an administrator
and activate the Enhanced Security mode.
2.4.1

Turning the Enhanced Security Mode ON/OFF

This section describes how to turn the Enhanced Security mode ON/OFF.
1
Press Utility/Counter on the control panel to display the Utility Menu Screen.
2
Press [03 Administrator Setting].
A password entry screen will be displayed.
3
Enter the administrator password.
% Use the touch panel keypad to enter the administrator password consisting of 8 alphanumeric char-
acters, then press [OK].
% Passwords are case sensitive.
% If a wrong password or fewer than 8 alphanumeric characters/symbols are entered and [OK] is
pressed, the warning message [Password is incorrect / Please wait for a while] will appear, and no
key will work for five seconds. Enter the correct password after five seconds.
% The information on failed authentication will be saved in the audit log.
bizhub PRO C6000L
2
2-24