Configuring Eco-Settings Using The Embedded Web Server; Configuring Energy- And Paper-Saving Options - Lexmark Color Laser Administrator's Manual

Updating the network license
Using the Embedded Web Server
1
Click Solutions.
2
Under Installed Solutions, click the appropriate application link.
3
Click License > Update License.
4
Select Network.
5
Click Update License.
Using MarkVision Professional
1
In MarkVision Professional, select the device where the application is installed.
2
Click Settings > Embedded Solutions > Solutions Management.
3
Under the appropriate application, click Update License.
4
In the Update License window, select Use a network license server.
5
Click Update License.

Configuring Eco-Settings using the Embedded Web Server

Configuring energy- and paper-saving options

1
Access the application configuration settings from the Embedded Web Server or MarkVision Professional.
2
Adjust the following settings as necessary:
•
Eco Mode—Choose Off, Energy, Energy/Paper, or Paper.
Note: If your printer model supports duplex printing, then you will be able to print on both sides of the paper.
Choosing Energy/Paper will automatically set 2-Sided Printing and Sleep Mode to default values. Additional
changes made to these settings through the Embedded Web Server will be ignored.
• Standby Mode—Type the number of minutes (1–240) the printer waits before it enters Standby Mode.
•
Sleep Mode or Power Saver—Type the number of minutes (1–240) the printer waits before it enters Sleep
Mode or Power Saver mode.
•
Screen Brightness—Type a screen brightness percentage (20–100).
•
2-Sided Printing—Choose 1-Sided, 2-Sided Long Edge, or 2-Sided Short Edge.
•
Darkness or Toner Darkness—Choose a toner darkness value (1–5).
• Quiet Mode—Select this check box to reduce the amount of noise produced by the printer.
Note: When this option is selected, printer engine motors do not start until a print job is ready to print. You
may notice a short delay before the first page is printed, as well as a reduction in processing speed.
• Lock UI—Select this check box to prevent users from changing Eco-Settings from the printer control panel.
3
Do one of the following:
Configuring the application
11