Remote Control Unit - Pioneer PDP-425CMX Operating Instructions Manual

Remote control unit

1
2
3
4
5
6
7
8
9
When handling the remote control unit
¶ Do not drop the remote control unit or expose it to
moisture.
¶ Do not use the remote control unit in a location subject to
direct sunlight, heat radiation from a heater, or in a place
subject to excessive humidity.
¶ When the remote control unit's batteries begin to wear out,
the operable distance will gradually become shorter. When
this occurs, replace all batteries with new ones as soon as
possible.
1
SCREEN SIZE button
Press to select the screen size (page 20).
2
INPUT buttons
Press to select the input (page 18).
3
MENU button
Press to open and close the on-screen menu
(pages 16 to 35).
4
ADJUST (5/∞/3/2) buttons
Use to navigate menu screens and to adjust various
settings on the unit (pages 16 to 35).
5
SET button
Press to adjust or enter various settings on the unit
(pages 16 to 35).
6
SUB INPUT button
During multi-screen display, use this button to change
inputs to subscreens (page 22).
0
7
SPLIT button
-
Press to switch to multi-screen display (page 22).
8
=
MUTING button
Press to mute the volume (page 19).
9
ID NO. SET button
Button used by professional installers.
~
0
AUTO SET UP button
When using computer signal input, automatically sets
!
the [POSITION], [CLOCK] and [PHASE] to optimum
values (page 25).
-
STANDBY/ON button ( )
@
Press to put the unit in operation or standby mode
# (page 18).
$
=
DISPLAY button
Press to view the unit's current input and setup mode
%
(page 19).
~
POINT ZOOM button
Use to select and enlarge one part of the screen (page
21).
!
FREEZE button
When memo screen function is enabled, a still image
is displayed in the subscreen (page 35).
@
SWAP button
During multi-screen display, use this button to switch
between main screen and subscreen (page 22).
#
PIP SHIFT button
When using the picture-in-picture mode with multi-
screen display, use this button to move the position of
subscreen (page 22).
$
VOLUME (+/–) buttons
Use to adjust the volume (pages 18 and 19).
%
CLEAR button
Button used by professional installers.
Part Names and Functions
7
En