Oki MB441MFP User Manual page 95

Item
Network Scale
HUB Link Setting
TCP ACK
Network PS-Protocol (MB451/MB451w/
MB471/MB471w/MB491/ES4191 MFP Only)
Wireless
Setting
Enabling Wired
Communications
Factory
Defaults
Mail SMTP Server
Server
Setup
SMTP Port
SMTP Encryption
Receive Setting
POP3 Server
POP3 Port
Manual SSID
Setup
Security
WEP Key
WPA Encryp-
tion Type
WPA Pre-
shared Key
Set automat- WPS-PBC
ically (WPS)
WPS-PIN
Wireless
reconnection
Execute
List of the Device Setting Menu Items
Factory
Default
Normal When [Normal] is set: the machine works
effectively even when connected to a HUB
that has a spanning tree feature. However,
printer start up time gets longer when
computers are connected to two or three
small LANs.
When [Small] is set: computers can cover
from two or three small LANs to a largeLAN,
but it may not work effectively when it is con-
nected to a HUB with a spanning tree feature.
Auto Negoti- Sets the hub linking method. Usually,
ate select [Auto Negotiate].
Type1 Sets a type of TCP Acknowledgment.
When Type1 is set, the printer replies to
every packet.
When Type2 is set, the printer replies to
plural packets in a mass.
When printing comes to take time by the
setting of the hub, choosing Type2 may
improve the matter.
Usually, setting Type1 hasn't any problem.
RAW Sets a PS-protocol.
default Input SSID
Disable The security of the wireless LAN function
WPA-EAP can set only in Web.
(NULL) Input WEP Key
This item is displayed when WEP was
selected in the Security item.
TKIP WPA-PSK coding method
This item is displayed when WPA or WPA2
was selected in the Security item.
(NULL) Input Pre Shared Key
This item is displayed when WPA or WPA2
was selected in the Security item.
- WPS-PBC is executed.
- WPS-PIN is executed.
- Wireless reconnection is executed.
- Wired environment is validated.
This item is displayed when Wireless LAN
is effective.
The settings of the network, mail server, LDAP
server, and secure protocol server are returned
to the default settings.
(NULL) Sets the IP address or host name for the
SMTP server.
25 Sets the port number. Usually, the default is used.
Available range: 1 to 65535
None Selects an encryption method in the SMTP
communication.
Disable Select a protocol to use for the E-mail
reception.
(NULL) Sets the IP address or host name for the
POP3 server.
110 Sets the port number prepared by the
POP3 on the POP3 server.
Available range: 1 to 65535.
- 95 -
Description
6