Operational Safety Information; Maintenance Information - Sagem 3100MFPX - Phaser B/W Laser User Manual

Sagem_Fax_ATA101S.book Page 14 Jeudi, 21. février 2008 5:09 17

Operational Safety Information

To ensure the continued safe operation of your Sagem Communications
equipment, follow these safety guidelines at all times.
Do These:
• Always follow all warnings and instructions that are marked on or
supplied with the equipment.
• Always exercise care when moving or relocating equipment.
• Always locate the equipment in an area that has adequate ventilation,
and space for servicing.
• Always use materials and supplies specifically designed for your
Sagem Communications equipment. Use of unsuitable materials may
result in poor performance.
• Always unplug this equipment from the electrical outlet before cleaning.
Do Not Do These:
• This equipment should not be placed in a built-in unit unless proper
ventilation is provided. Please contact your authorized local dealer for
further information.
• Never remove covers or guards that are fastened with screws. There
are no operator serviceable areas within these covers.
• Never locate the equipment near a radiator or any other heat source.
• Never override or "cheat" any of the electrical or mechanical interlock
devices.
• Never operate the equipment if you notice unusual noises or odors.
Disconnect the power cord from the electrical outlet and contact your
local Sagem Communications Service Representative or Service
Provider immediately.

Maintenance Information

• Do not use aerosol cleaners. The use of cleaners that are not approved
may cause poor performance of the equipment, and could create a
dangerous condition.
• Use supplies and cleaning materials only as directed in the customer
documentation. Keep all these materials out of the reach of children.
• Do not remove covers or guards that are fastened with screws. There
are no parts behind these covers that you can maintain or service.
• Do not perform any maintenance procedures unless you have been
trained to do them by an authorized local dealer or unless a procedure
is specifically described in the customer documentation.
14 Sagem Fax ATA 101S