Sagem 3100MFPX - Phaser B/W Laser User Manual page 11

Sagem_Fax_ATA101S.book Page 7 Jeudi, 21. février 2008 5:09 17
Step 4 - SIP Configuration > SIP Phone menu
The User name and Display Name settings must always be entered,
whether you use a SIP proxy or not. The Auth. user name and Auth.
password settings should be entered if you connect the ATA to a SIP
proxy requiring authentication. In all cases, the information
communicated by the network administrator must be entered.
The Preferred codec setting lets you choose the codec to be used to
compress voice. Your infrastructure must support at least one of the
following codecs:
• G711 PCMA
• G711 PCMU
• G729
The Fax Mode setting lets you choose your fax transfer mode. You
can choose between two technologies:
You must define the technology supported by your
VoIP infrastructure.
In doubt, choose the T.38 option.
• Fax pass-through (only via the G.711 encoder): in this mode,
the VoIP infrastructure considers a fax to be an ordinary voice
call.
User guide
Note
7