Usb Connectors - Asus F1A75-V EVO User Manual

8. USB 2.0 connectors (10-1 pin USB34, USB56, USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480Mbps connection speed.
F1A75-V EVO USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
9. USB 3.0 connector (20-1 pin USB3_56)
This connector is for the additional USB 3.0 ports. Connect the USB 3.0 bracket cable
to this connector, then install the USB 3.0 bracket to the rear side of the chassis. If your
chassis support customized front panel installation, with ASUS USB 3.0 header, you
can have a front panel USB 3.0 solution.
F1A75-V EVO USB3.0 Front panel connector
The USB 3.0 module is purchased separately.
1-24
F1A75-V EVO
F1A75-V EVO
USB78 USB910
PIN 1 PIN 1
USB3_56
USB34 USB56
PIN 1 PIN 1
Chapter 1: Product introduction