Internal Connectors; Internal Connectors Page; Hard Disk Activity Led Connector (4-Pin Hdled1); Usb 2.0 Connectors (10-1 Pin Usb910) - Asus Z10PE-D8 WS User Manual

2.9.2

Internal connectors

1.

Hard disk activity LED connector (4-pin HDLED1)

This LED connector is for the storage add-on card cable connected to the SATA or
SAS add-on card. The read or write activities of any device connected to the SATA or
SAS add-on card causes the front panel LED to light up.
2.

USB 2.0 connectors (10-1 pin USB910)

These connectors are for USB 2.0 ports. Connect the USB module cables to
connectors USB78 and USB910, then install the modules to a slot opening at the back
of the system chassis. These USB connectors comply with USB 2.0 specification that
supports up to 480 Mbps connection speed.
ASUS Z10PE-D8 WS
2-35