Vcore Ripple Test(Open up the DOS Editor)
CPU
CH1
Condition
1.Boot the system to the Win98SE environment(Command Prompt Only)
Dos mode and run the stpclk.bat
2.At the main menu ,type "U" to go to the "Utilities Submenu"
3.At the next menu , type "B" to "Enable Stop Clock Throttling"
11.
50.0%~65.0%
12.
13.
Pop-up menu.
7.Measure the Vcore waveform
68
Athlon XP 2000+
STP CLK
At this menu , type "7" to enable Stop Clock Throttling at the rang of
Press <ESC> twice and then "Y" to exit the stpclk.bat program.
Type "EDIT" to enter the "EDIT" program. Press "Alt+F" to open up a
Vcore Transient waveform
M\B
CH3
VKQ/1.1
Vcore
RESULT PASS