Vcore Ripple Test(Open Up The Dos Editor) - Biostar M7 SUA Engineering Validation Test Report

M7sua compatibility test report

Hide thumbs Also See for M7 SUA:

Table of Contents

Vcore Ripple Test(Open up the DOS Editor)

CPU

CH 1

Condition

1.Boot the system to the Win98SE environment(Command Prompt Only)

Dos mode and run the stpclk.bat

2.At the main menu ,type Enter & Enter & "Y" to go to the "menu"

3.At the next menu , select "Power Management Utilities4

4.At this menu , select "Throttle Ratio" and set at the rang of 50.0%~56.0%

and set "Enable" of " ON"

5.Press <ESC> tiwce and then "Y" to exit the stpclk.bat program.

6.Type "EDIT" to enter the "EDIT" pragram. Press "Alt+F" to open up a

Pop-up menu.

7.Measure the Vcore waveform

Athlon_xp_2600+

Vcore

Vcore Transient waveform

M\B

CH 2

SUA 6.0

STPCLK

RESULT PASS

Table of Contents

M7vkq pro