Vcore Ripple Test(Open Up The Dos Editor) - Biostar M7 VIK Engineering Validation Test Report

M7vik compatibility test report

Hide thumbs Also See for M7 VIK:

Table of Contents

Vcore Ripple Test(Open up the DOS Editor)

CPU

CH 1

STPCLK pin waveform

Condition

1.Boot the system to the Win98SE environment(Command Prompt Only)

Dos mode and run the stpclk.bat

2.At the main menu ,type "U" to go to the "Utilities Submenu"

3.At the next menu , type "B" to "Enable Stop Clock Throttling"

1.At this menu , type "7" to enable Stop Clock Throttling at the rang of

50.0%~65.0%

2.Press <ESC> tiwce and then "Y" to exit the stpclk.bat program.

3.Type "EDIT" to enter the "EDIT" pragram. Press "Alt+F" to open up a

Pop-up menu.

7.Measure the Vcore waveform

Athlon_xp_2700+

Vcore Transient waveform

M\B

CH 2

VIK/1.0

Vcore waveform

RESULT PASS

Table of Contents