Vcore Ripple Test(Open Up The Dos Editor) - Biostar M7VIZ V8.X Test Report

Vcore Ripple Test(Open up the DOS Editor)

CPU
CH 1
Condition 1.Boot the system to the Win98SE environment(Command Prompt Only)
Dos mode and run the stpclk.bat
2.At the main menu ,type Enter & Enter & "Y" to go to the "menu"
3.At the next menu , select "Power Management Utilities4
4.At this menu , select "Throttle Ratio" and set at the rang of 50.0%~56.0%
and set "Enable" of " ON"
5.Press <ESC> tiwce and then "Y" to exit the stpclk.bat program.
6.Type "EDIT" to enter the "EDIT" pragram. Press "Alt+F" to open up a
Pop-up menu.
7.Measure the Vcore waveform
42
Athlon_xp_2600+
Vcore
Vcore Transient waveform
M\B
CH 2
VIZ1.3
STPCLK
RESULT PASS