Vcore Transient Test(Dos Mode) - Biostar M7 VKQ Engineering Validation Test Report

CPU Athlon(TM) XP 1800+
CH 1 STPCLK pin waveform
Condition 1.Boot the system to the Win98SE environment(Command Prompt Only)
Dos mode and run the stpclk.bat
2.At the main menu ,type "U" to go to the "Utilities Submenu"
3.At the next menu , type "B" to "Enable Stop Clock Throttling"
4.At this menu , type "7" to enable Stop Clock Throttling at the rang of
50.0%~65.0%
5.Press <ESC> twice and then "Y" to exit the stpclk.bat program
6.Measure the Vcore waveform
52

Vcore Transient Test(Dos Mode)

Vcore Transient waveform
M\B
CH 2 Vcore waveform
VKQ/0.9
RESULT PASS