Access Points; Create A New Access Point; Create Access Point Groups - Nokia 5800 - XpressMusic Smartphone - WCDMA User Manual

If you select Run automatically
performed when the device asks for it, and the
connectivity test is performed successfully, the access
point is saved to the internet destinations.
To view advanced settings, select
settings. Changing the advanced settings for the WLAN is
not recommended.

Access points

Create a new access point

Select Menu Settings
>
Destinations.
You may receive access point settings in a message from
a service provider. Some or all access points may be preset
for your device by your service provider, and you may not
be able to change, create, edit, or remove them.
When you open one of the access point groups (
, ), you can see the access point types:
indicates a protected access point
indicates a packet data access point
indicates a wireless LAN (WLAN) access point
Tip: You can create internet access points in a WLAN
with the WLAN wizard.
To create a new access point, select
device asks to check for available connections. After the
search, connections that are already available are shown
and can be shared by a new access point. If you skip this
© 2009 Nokia. All rights reserved.
or allow the test to be
Options Advanced
>
and Connectivity
>
Access point. The
step, you are asked to select a connection method and to
define the settings needed.
To edit the settings of an access point, open one of the
access point groups, and select an access point. Follow the
instructions from your service provider.
Connection name
●
Data bearer
●
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined
empty, unless your service provider has instructed
otherwise.
To use a data connection, your service provider must
support this feature, and if necessary, activate it for your
SIM card.

Create access point groups

, ,
Select Menu
>
Destinations.
Some applications allow you to use access point groups
for network connections.
To avoid selecting a single access point every time the
device makes a network connection, you can create a
group that contains various access points to connect to
that network and define the order in which the access
points are used.
For example, you can add wireless LAN (WLAN) and packet
data access points to an internet access point group, and
use the group for browsing the web. If you give WLAN the
— Enter a name for the connection.
— Select the data connection type.
or with a red *. Other fields can be left
Settings and Connectivity
Connectivity
>
71