1.
lever forward until the button on the lever pops up
(Figure 15)
Figure 15
Bag-on-demand lever (in bagging position)
For recycling the grass and leaf clippings, press the
button on the lever and move the lever rearward
until the button on the lever pops up.
Important:
For proper
operation,
remove
any grass
clippings
and
debris
from
the
bag-on-demand
door
and the surrounding
opening
(Figure
16) before
you move
the
bag-on-demand
lever from
one position
to
another.
The blade is sharp;
contacting
the blade can
result in serious personal
injury. Also, an open
rear discharge
area could allow small stones
and other similar
debris to be thrown
in the
operator's
or bystander's
direction
and result in
serious
personal
injury or death to the operator
or bystanders.
Stop the engine
and wait for all moving
parts
to
stop
before
cleaning
the bag-on-demand
door
and the surrounding
opening.
1.
Clean here
G009582
Figure 16
Side-discharging
the Clippings
Use the side discharge for cutting very tall grass.
If the grass bag is on the mower and the bag-on-demand
lever is in the bagging position, move the lever
to the recycling position
(refer to Operating the
Bag-on-Demand
Lever).
The blade is sharp;
contacting
the blade can result
in serious personal
injury.
Stop the engine
and wait for all moving
parts
to stop
before
leaving
the operating
position.
11