Ports Required By Cisco Tms - Cisco TELEPRESENCE MANAGEMENT SUITE Installation And Getting Started Manual

Installation and upgrade guidelines

Ports required by Cisco TMS

The default Windows Server 2008 firewall rules interfere with Cisco TMS communications. Cisco TMS
will not function properly until these Windows Firewall port settings are modified.
The following ports are used by Cisco TMS and must be enabled in the Windows Firewall. See the
Cisco TMS Product Support document for port specifics for each managed device type.
Administrators can disable Windows Firewall or open the ports required for Cisco TMS. See
http://technet.Microsoft.com/en-us/library/cc748991.aspx for Microsoft documentation on configuring
firewall rules.
Note: Cisco TMS cannot use multiple network cards on a server and will only bind to the first
available network interface. Cisco TMS can manage a public and private network so long as the
public network connection is further upstream from Cisco TMS, rather than being directly connected
to Cisco TMS (using multiple network interface cards).
Cisco TelePresence Management Suite Installation and Getting Started Guide Page 13 of 70